AMPRO

Home >> MINIMODULE >> AMPRO
MiniModule 1394
Via VT 6307L IEEE 1394 Host Controller Compliant with 1394 Open HCI Rev. 1.0 and 1.1 Descriptor based isochronous and asynchronous DMA channels for receive/transmit packets Fully interoperable with IEEE standard 1395-1995 devices Provides two 1394a fully compliant ports at 100/200/400 Mbp Cable power presence monitoring Supports separate TPBIAS for each port Supports 32-bit 33MHz PC/104-Plus host interface compliant with PCI Rev. 2.2 Configurable for any PC/104-Plus bus “slot”
MiniModule A2D
(8) single-ended 12-bit A/D inputs Input range of 0-5V, 0-10V, +/-5V, or +/-10V, software-selectable 4-20mA current loop measurement, hardware-configurable (2) 12-bit D/A outputs on some models 2.048V or 4.095V output full scale (16) TTL general-purpose I/Os (GPIOs) on some models
MiniModule ESB
PCI Fast Ethernet controller (AMD AM79C972): Onboard RJ45 twisted-pair interface 10 or 100 megabits/second, autodetected Full-duplex operation Dual serial ports: 16550 FIFO-buffered, with full handshaking One port configurable for RS232/RS485 Other port configurable for RS232/TTL Supports optional interrupt sharing Socket for bootable DiskOnChip 2000 SSD PC/104-Plus compliant form-factor
MiniModule FPGA
Gate count from 20,000 to 1,000,000 Wide variety of performance/size options within the product line Convenient configuration/download options including PC/104 (ISA Bus), USB or JTAG Ample I/O pin counts from 132 to 150 Versatile enough for many applications Design software from Altera (free for some FPGA models) Industry-standard PC/104 form factor
MiniModule GPIO
16, 32, or 48 inputs/outputs Non-isolated models include: 8255-compatible I/O ports Inputs sink up to 24mA each Outputs source up to 15mA each Capable of driving relay modules Isolated models include: Outputs: Reliable 10 VA SIP Reed relays, SPST, 0.15 Ohms Outputs normally open Inputs: Optically isolated Input range selectable with socketed DIP resistor
MiniModule ISA
ITE IT8888F PCI-to-ISA bridge Full 24-bit ISA addressing Transparent to Operating Systems DMA support ISA bus master 16-bit and 8-bit I/O and memory cycles 90x96mm (3.6" x 3.8")
MiniModule PCC
Based on Vadem VG-469 controller Register-level compatible with Intel 82365SL Complies with PCMCIA Release 2 Supports card types I, II, III, and IV Usable with 3.3V and 5V cards Supports hot insertion/removal Up to four PC card slots supported per system: One or two dual-slot local drive modules One or two dual-slot remote drive modules One dual-slot local drive module and one dual-slot remote drive module Supports most desktop and real-time operating systems
MiniModule PCC III
TI 1520 PCI-to-CardBus Host Controller PC/104-Plus Bus Interface (PCI v2.2 Compatible) Two PC Card or CardBus slots with hot insertion and removal Mix-and-Match 5V/3.3V 16-bit PC Cards and 3.3V CardBus cards Configurable for any PC/104-Plus bus “slot”
MiniModule SPL
Two PC-compatible RS232C serial ports with full handshaking One PC-compatible parallel port (unidirectional) Compact PC/104 form factor Low power, rugged, and reliable Wide operating temperature range
MiniModule SSP
Two PC-compatible RS232C serial ports One PC-compatible bidirectional parallel port RS422 or RS485 option on one serial port Compact PC/104 form factor Low power, rugged, and reliable Wide operating temperature range
MiniModule UART
(4) serial ports, RS232, RS422, or RS485 Configurable by jumper- or software-selection Programmable baud rates, data format, & interrupt control IRQ selection (2-7, 10-12, 15) for each port COM1: through COM4: addressing 16554 with 16 byte FIFO supports up to 115K baud 16C864 with 128 byte FIFO supports up to 921.6K baud RS485 supports 2-wire or 4-wire interface RS422/485 termination and "echo" individually selectabe
MiniModule USB2
NEC uPD720101 USB 2.0 Host Controller Compliant with USB2.0 Specification Provides USB 2.0 host root hub with up to four downstream ports All downstream facing ports can handle High-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps) transactions Compliant with OHCI USB Rev1.0a Compliant with EHCI for USB Rev 1.0 Supports 32-bit 33MHz PC/104-Plus host interface compliant with PCI Rev. 2.2 Configurable for any PC/104-Plus bus “slot”