KEPWARE

Home >> KEPSERVEREX >> KEPWARE
6B11
Analog Input Modules
6B12
Analog Input Modules
6B13
Analog Input Modules
6B21
Analog Output Modules
6B50
Digital I/O modules
CompactLogix 5300
Built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NET-ENI Series B using Channel 0
CompactLogix 5320
Built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NET-ENI Series B using Channel 0
CompactLogix 5330
Built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NET-ENI Series B using Channel 0
ControlLogix 5550
via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5553
via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5555
via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5561
via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5562
via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5563
via 1756 ENET/ENBT Module or via 1761 NET-ENI
CX-1000 series
using Binary Data-Link Protocol.
DL-450
via an Hx-ECOM module.
DX OPC Plug-in for KEPServerEX
OPC Data Exchange (DX) was designed to address the needs of Device-to-Device and Bus-to-Bus interoperability by applying the same technologies currently used by desktop applications at the device level. By adding OPC DA Client support to an existing OPC DA server we end up with a DX server that not only provides access to its data, but has the ability to gather data from other OPC DA enabled devices.
E151-FB00
Ethernet I/O modules
E190-8B00
Ethernet I/O modules
E191-CB00
Ethernet I/O modules
E200-FB00
Ethernet I/O modules
E201-8B00
Ethernet I/O modules
E250-FB00
Ethernet I/O modules
E290-FB00
Ethernet I/O modules
E300-FB00
Ethernet I/O modules
FlexLogix 5400
via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel 0
FlexLogix 5433
via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel 0
FlexLogix 5434
via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel 0
FP0
via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
FP1 C16
via MEWTOCOL-COM
FP1 C24
via MEWTOCOL-COM
FP1 C40
via MEWTOCOL-COM
FP10SH
via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
FP3
via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
FPM
via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
GS1
Drive
GS2
Drive
H4-EBC-F
Use NetEdit to manually configure modules to base.
Horner OCS
(Horner's Operator Control Stations)
IOtech PointScan 200 modules
connected through a PointScan 100 module.
KEPServerEX OPC Server
Kepware's KEPServerEX is the leading OPC Server providing unsurpassed industrial connectivity with over 80 downloadable device drivers that support 100's of model types.
M-Cut
utilize the 8-byte protocol
M-Drive
utilize the 8-byte protocol
M-Rotary
utilize the 8-byte protocol
M-Shuttle
utilize the 8-byte protocol
M-Track
utilize the 8-byte protocol
M-Trim
utilize the 8-byte protocol
M151-FB00
RS-485 I/O connected through and Ethernet I/O module.
M181-4B00
RS-485 I/O connected through and Ethernet I/O module.
M190-8B00
RS-485 I/O connected through and Ethernet I/O module.
M200-FB00
RS-485 I/O connected through and Ethernet I/O module.
M250-8B00
RS-485 I/O connected through and Ethernet I/O module.
M290-FB00
RS-485 I/O connected through and Ethernet I/O module.
M300-8B00
RS-485 I/O connected through and Ethernet I/O module.
MC4-Injection Moulding Machine
Simultaneous device connections are not allowed.
MicroLogix 1000
via 1761-NET-ENI
MicroLogix 1200
via 1761-NET-ENI
MicroLogix 1500
via 1761-NET-ENI
Page 1 | Page 2